The bench legs are 15?, but the top adds another 1 1/2? so total it sit 16 1/2? tall. this sits just fine at her 30? table. of course,you could always use a taller leg if you wanted�the plans would be the same.. This super easy x leg bench can be made for about $20 in only a couple hours. all you need is some good 2x material, a miter saw and a drill.. Instructions for the farmhouse bench diy project: start by building your legs. for each leg, you�ll need your 15.5 inch boards, one 14 inch board, and one 12.5 inch board. use your kreg jig to drill your pocket holes. apply some wood glue to your joint, and screw your support pieces to your legs using your countersink drill bit..
I used a piece of wood 2x12x60 with 4 hairpin legs (ordered online). the entire project took me about 30 minutes. all i did was cut wood, sand wood, attach l.... Te deum 16" satin black hairpin legs(set of 4), 3/8" diameter, metal heavy duty mid-century modern table legs, for coffee table,tv stand,sofa side table,night stands,end tables, etc.. Our hairpin legs, square legs, curvy legs and industrial legs are typically used on coffee tables, end tables, kitchen tables, dining room tables, console tables, farmhouse tables, a bench, whatever else you can think of..
